Close

A note on cookies

We use cookies to improve your experience of our website. If you want to find out more see our Privacy Policy

Menu

Materials Research Institute

People menu

Prof Mike Reece

Professor of Functional Ceramics

Department School of Engineering and Materials Science
 Engineering 336, Mile End
Telephone +44 (0)20 7882 8872
Email m.j.reece@qmul.ac.uk
Homepage http://www.sems.qmul.ac.uk/m.j.reece

Research Interests

Prof Reece’s research at QMUL has focused on ferroelectric / ferroelastic / piezoelectric materials. A major theme in this work is the effect of ferroelectric / ferroelastic switching on their mechanical properties and degradation. Recent research topics are: characterisation of the electromechanical properties of ferroelectric thin films using nanoindentation; development of new ferroelectric ceramics with super high Curie points (>1,000C) for application as high temperature piezoelectric sensors; rapid sintering techniques to produce new materials. Recently set up the first Spark Plasma Sintering (SPS) furnace in the UK. This is being used to develop new and novel structural and functional ceramics and composites. This includes materials with nanoscale microstructures, high texture and non-equilibrium phases. A longterm objective of his work is to commercialise materials prepared by SPS through knowledge transfer and spin-outs. He is a Director of Nanoforce Technology Ltd, a spin-out company of QMUL. Nanoforce focuses on the development of new processing routes for nanomaterials that can be commercialised. He is a visiting Professor at Xi'an Jiaotong University and Invited Professor at The Shanghai Institute of Ceramics. He founded the Ceramic Matrix Composite Forum while at NPL (1992-99). He was a member of the IoM3 Electronics Applications Divisional Board (2002-07). He was the founding chair for the IoM3 Functional Materials Committee (2008-2012). Editor of Advances in Applied Ceramics (2012-). Editorial Borad of Journal of Advanced Dielectrics. Royal Society Industry Fellow (2011-2015).

2017

Zoli L, Vinci A, Silvestroni L, Sciti D, Reece M and Grasso S (2017). Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres. Materials and Design  vol. 130, 1-7. 10.1016/j.matdes.2017.05.029

Watkinson EJ, Ambrosi RM, Kramer DP, Williams HR, Reece MJ, Chen K, Sarsfield MJ, Barklay CD, Fenwick H, Weston DP and Stephenson K (2017). Sintering trials of analogues of americium oxides for radioisotope power systems. Journal of Nuclear Materials  vol. 491, 18-30. 10.1016/j.jnucmat.2017.04.028

McKinnon R, Grasso S, Tudball A and Reece MJ (2017). Flash spark plasma sintering of cold-Pressed TiB2-hBN. Journal of The European Ceramic Society  vol. 37, (8) 2787-2794. 10.1016/j.jeurceramsoc.2017.01.029

Bertolla L, Dlouhý I, Tatarko P, Viani A, Mahajan A, Chlup Z, Reece MJ and Boccaccini AR (2017). Pressureless spark plasma?sintered Bioglass? 45S5 with enhanced mechanical properties and stress?induced new phase formation. Journal of The European Ceramic Society  vol. 37, (7) 2727-2736. 10.1016/j.jeurceramsoc.2017.02.003

Maizza G, Mastrorillo GD, Grasso S, Ning H and Reece MJ (2017). Peltier effect during spark plasma sintering (SPS) of thermoelectric materials. Journal of Materials Science  1-12. 10.1007/s10853-017-1188-1

Valenza F, Gambaro S, Muolo ML, Cacciamani G, Tatarko P, Saunders TG, Reece MJ, Schmidt A, Schubert T, Weißgärber T and Passerone A (2017). Wetting and interfacial phenomena of Ni-Ta alloys on CVD-SiC. International Journal of Applied Ceramic Technology  vol. 14, (3) 295-304. 10.1111/ijac.12632

Tatarko P, Grasso S, Saunders TG, Casalegno V, Ferraris M and Reece MJ (2017). Flash joining of CVD-SiC coated Cf/SiC composites with a Ti interlayer. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2017.05.016

Lerdprom W, Grasso S, Jayaseelan DD, Reece MJ and Lee WE (2017). Densification behaviour and physico-mechanical properties of porcelains prepared using spark plasma sintering. Advances in Applied Ceramics  1-9. 10.1080/17436753.2017.1309800

Srinivasan B, Boussard-Pledel C, Dorcet V, Samanta M, Biswas K, Lefèvre R, Gascoin F, Cheviré F, Tricot S, Reece M and Bureau B (2017). Thermoelectric properties of highly-crystallized Ge-Te-Se glasses doped with Cu/Bi. Materials  vol. 10, (4) 10.3390/ma10040328

Albaaji AJ, CASTLE E, Reece MJ, Hall JP and Evans SL (2017). Effect of ball-milling time on mechanical and magnetic properties. Elsevier  Materials and Design  10.1016/j.matdes.2017.02.091

MENG N, Zhu X, Mao R, Reece M and Bilotti E (2017). Nanoscale Interfacial Electroactivity in PVDF/PVDF-TrFE Blended Films with Enhanced Dielectric and Ferroelectric Properties. Royal Society of Chemistry  Journal of Materials Chemistry C  vol. 5, 3296-3305. 10.1039/C7TC00162B

Huang Y, Zhang H, Auger MA, Hong Z, Ning H, Gorley MJ, Grant PS, Reece MJ, Yan H and Roberts SG (2017). Microstructural comparison of effects of hafnium and titanium additions in spark-plasma-sintered Fe-based oxide-dispersion strengthened alloys. Journal of Nuclear Materials  vol. 487, 433-442. 10.1016/j.jnucmat.2017.02.030

MAHAJAN A, Zhang H, Wu J, Ramana EV, Reece M and Yan H (2017). Effect of Phase Transitions on Thermal Depoling in Lead-Free 0.94(Bi0.5Na0.5TiO3)-0.06(BaTiO3) Based Piezoelectrics. American Chemical Society  The Journal of Physical Chemistry C  10.1021/acs.jpcc.6b12501

Picot OT, Rocha VG, Ferraro C, Ni N, D'Elia E, Meille S, Chevalier J, Saunders T, Peijs T, Reece MJ and Saiz E (2017). Using graphene networks to build bioinspired self-monitoring ceramics. Nat Commun  vol. 8, 10.1038/ncomms14425

Yu M, Grasso S, Mckinnon R, Saunders T and Reece MJ (2017). Review of flash sintering: materials, mechanisms and modelling. Advances in Applied Ceramics  vol. 116, (1) 24-60. 10.1080/17436753.2016.1251051

Han G, Zhang R, Popuri SR, Greer HF, Reece MJ, Bos JWG, Zhou W, Knox AR and Gregory DH (2017). Large-scale surfactant-free synthesis of p-Type SnTe nanoparticles for thermoelectric applications. Materials  vol. 10, (3) 10.3390/ma10030233

Du B, Zhang R, Chen K, Mahajan A and Reece MJ (2017). The impact of lone-pair electrons on the lattice thermal conductivity of the thermoelectric compound CuSbS2. Journal of Materials Chemistry A  vol. 5, (7) 3249-3259. 10.1039/c6ta10420g

Du B, Gucci F, Porwal H, Grasso S, Mahajan A and Reece MJ (2017). Flash spark plasma sintering of magnesium silicide stannide with improved thermoelectric properties. Journal of Materials Chemistry C  vol. 5, (6) 1514-1521. 10.1039/c6tc05197a

2016

Chen K, Du B, Bonini N, Weber C, Yan H and Reece MJ (2016). Theory-Guided Synthesis of an Eco-Friendly and Low-Cost Copper Based Sulfide Thermoelectric Material. Journal of Physical Chemistry C  vol. 120, (48) 27135-27140. 10.1021/acs.jpcc.6b09379

Cedillos-Barraza O, Manara D, Boboridis K, Watkins T, Grasso S, Jayaseelan DD, Konings RJM, Reece MJ and Lee WE (2016). Investigating the highest melting temperature materials: A laser melting study of the TaC-HfC system. Sci Rep  vol. 6, 37962-37962. 10.1038/srep37962

Tatarko P, Casalegno V, Hu C, Salvo M, Ferraris M and Reece MJ (2016). Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering. Journal of The European Ceramic Society  vol. 36, (16) 3957-3967. 10.1016/j.jeurceramsoc.2016.06.025

Tatarko P, Chlup Z, Mahajan A, Casalegno V, Saunders TG, Dlouhý I and Reece MJ (2016). High temperature properties of the monolithic CVD ?-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding. Journal of The European Ceramic Society  vol. 37, (4) 1205-1216. 10.1016/j.jeurceramsoc.2016.11.006

Aman A, Jordan R, Chen Y, Stadelmann R, Lugovy M, Orlovskaya N, Payzant EA, dela Cruz C, Reece MJ, Graule T and Kuebler J (2016). Non-congruence of high-temperature mechanical and structural behaviors of LaCoO3 based perovskites. Journal of The European Ceramic Society  vol. 37, (4) 1563-1576. 10.1016/j.jeurceramsoc.2016.11.005

Albaaji AJ, CASTLE E, Reece MJ, Hall JP and Evans SL (2016). Mechanical and magnetic properties of spark plasma sintered soft magnetic FeCo alloy reinforced by carbon nanotubes. Cambridge University Press (Cup): Stm Journals  Journal of Materials Research  10.1557/jmr.2016.372

Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo VM, Grasso S and Reece MJ (2016). Erratum: Corrigendum to ?Mechanical properties and residual stresses in ZrB2?SiC spark plasma sintered ceramic composites? (J. Eur. Ceram. Soc. (2016) 36(7) (1527?1537)). Journal of The European Ceramic Society  vol. 36, (14) 3545-3545. 10.1016/j.jeurceramsoc.2016.05.041

Lugovy M, Slyunyayev V, Orlovskaya N, Reece M, Graule T and Kuebler J (2016). Cyclic fatigue effect in particulate ceramic composites. Elsevier  Journal of The European Ceramic Society  vol. 36, (14) 3257-3266. 10.1016/j.jeurceramsoc.2016.05.020

Ning H, Reece MJ, Smeacetto F and Salvo M (2016). Oxidation protective glass?ceramic coating for higher manganese silicide thermoelectrics. Springer Verlag (Germany)  Journal of Materials Science  vol. 51, (20) 9484-9489. 10.1007/s10853-016-0192-1

MENG N, Mao R, Tu W, Zhu X, Wilson R, Bilotti E and Reece M (2016). Processing and Characterization of Free Standing Highly Oriented Ferroelectric Polymer Films with Remarkably Low Coercive Field and High Remnant Polarization. Polymer  vol. 100, 69-76. 10.1016/j.polymer.2016.08.017

Grasso S, Saunders T, McKinnon R, Castle E, Tatarko P, Du B, Gucci F, Yu M, Porwal H, Milsom B and Reece M (2016). Spark plasma sintering in a flash. American Ceramic Society Bulletin  vol. 95, (7) 32-34.

Wang C, Wu D, Grasso S, Saunders T, Castle E, Yan H and Reece MJ (2016). Growth of SiC platelets using contactless flash technique. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan  vol. 124, (9) 845-847. 10.2109/jcersj2.16160

Amir A, Mahalingam S, Wu X, Porwal H, Colombo P, Reece MJ and Edirisinghe M (2016). Graphene nanoplatelets loaded polyurethane and phenolic resin fibres by combination of pressure and gyration. Elsevier  Composites Science and Technology  vol. 129, 173-182. 10.1016/j.compscitech.2016.03.031

Cedillos-Barraza O, Grasso S, Nasiri NA, Jayaseelan DD, Reece MJ and Lee WE (2016). Sintering behaviour, solid solution formation and characterisation of TaC, HfC and TaC-HfC fabricated by spark plasma sintering. Journal of The European Ceramic Society  vol. 36, (7) 1539-1548. 10.1016/j.jeurceramsoc.2016.02.009

Grasso S, Saunders T, Porwal H, Milsom B, Tudball A, Reece M and Chen IW (2016). Flash Spark Plasma Sintering (FSPS) of ? and ? SiC. Journal of The American Ceramic Society  vol. 99, (5) 1534-1543. 10.1111/jace.14158

Porwal H, Saggar R, Tatarko P, Grasso S, Saunders T, Dlouhý I and Reece MJ (2016). Effect of lateral size of graphene nano-sheets on the mechanical properties and machinability of alumina nano-composites. Elsevier  Ceramics International  vol. 42, (6) 7533-7542. 10.1016/j.ceramint.2016.01.160

Grasso S, Kim E-Y, Saunders T, Yu M, Tudball A, Choi S-H and Reece M (2016). Ultra-Rapid Crystal Growth of Textured SiC Using Flash Spark Plasma Sintering Route. American Chemical Society  Crystal Growth and Design  vol. 16, (4) 2317-2321. 10.1021/acs.cgd.6b00099

Chen C, Gao Z, Yan H and Reece MJ (2016). Crystallographic Structure and Ferroelectricity of (AxLa1-x)2Ti2O7 (A = Sm and Eu) Solid Solutions with High Tc. Journal of The American Ceramic Society  vol. 99, (2) 523-530. 10.1111/jace.13970

Csanádi T, Szommer P, Chinh NQ, Grasso S, Dusza J and Reece M (2016). Plasticity in ZrB2 micropillars induced by anomalous slip activation. Journal of The European Ceramic Society  vol. 36, (3) 389-394. 10.1016/j.jeurceramsoc.2015.10.035

Csanádi T, Grasso S, Koval¿íková A, Dusza J and Reece M (2016). Nanohardness and elastic anisotropy of ZrB2 crystals. Journal of The European Ceramic Society  vol. 36, (1) 239-242. 10.1016/j.jeurceramsoc.2015.09.012

Cain MG, Weaver PM and Reece MJ (2016). Ferroelectric materials for fusion energy applications. Journal of Materials Chemistry A  vol. 4, (27) 10394-10402. 10.1039/c6ta01935h

Du B, Chen K, Yan H and Reece MJ (2016). Efficacy of lone-pair electrons to engender ultralow thermal conductivity. Scripta Materialia  vol. 111, 49-53. 10.1016/j.scriptamat.2015.05.031

2015

Saunders T, Grasso S and Reece MJ (2015). Limiting oxidation of ZrB<inf>2</inf> by application of an electric field across its oxide scale. Journal of Alloys and Compounds  vol. 653, 629-635. 10.1016/j.jallcom.2015.08.112

Stadelmann R, Hughes B, Orlovskaya N, Grasso S and Reece MJ (2015). 2D Raman mapping and thermal residual stresses in SiC grains of ZrB2-SiC ceramic composites. Ceramics International  vol. 41, (10) 13630-13637. 10.1016/j.ceramint.2015.07.161

Ning H, Yan H and Reece MJ (2015). A High Curie Point Ferroelectric Ceramic Ca3(VO4)2. Ferroelectrics  vol. 487, (1) 94-100. 10.1080/00150193.2015.1070653

Al Mansour F, Karpukhina N, Grasso S, Wilson RM, Reece MJ and Cattell MJ (2015). The effect of spark plasma sintering on lithium disilicate glass-ceramics. Dent Mater  vol. 31, (10) e226-e235. 10.1016/j.dental.2015.07.001

Ning H, Mastrorillo GD, Grasso S, Du B, Mori T, Hu C, Xu Y, Simpson K, Maizza G and Reece MJ (2015). Enhanced thermoelectric performance of porous magnesium tin silicide prepared using pressure-less spark plasma sintering. Journal of Materials Chemistry A  vol. 3, (33) 17426-17432. 10.1039/c5ta03473f

Dillon FC, Moghal J, Koós A, Lozano JG, Miranda L, Porwal H, Reece MJ and Grobert N (2015). Ceramic composites from mesoporous silica coated multi-wall carbon nanotubes. Microporous and Mesoporous Materials  vol. 217, 159-166. 10.1016/j.micromeso.2015.06.024

Ashby SP, Bian T, Ning H, Reece MJ and Chao Y (2015). Thermal Diffusivity of SPS Pressed Silicon Powders and the Potential for Using Bottom?Up Silicon Quantum Dots as a Starting Material. Journal of Electronic Materials  vol. 44, (6) 1931-1935. 10.1007/s11664-014-3599-y

Porwal H, Estili M, Grünewald A, Grasso S, Detsch R, Hu C, Sakka Y, Boccaccini AR and Reece MJ (2015). 45S5 Bioglass(?)-MWCNT composite: processing and bioactivity. J Mater Sci Mater Med  vol. 26, (6) 10.1007/s10856-015-5529-9

Mani MK, Viola G, Hall JP, Grasso S and Reece MJ (2015). Observation of Curie transition during spark plasma sintering of ferromagnetic materials. Journal of Magnetism and Magnetic Materials  vol. 382, 202-205. 10.1016/j.jmmm.2015.01.066

Gao ZP, Shi B, Ye H, Yan HX and Reece MJ (2015). Ferroelectric and dielectric properties of Nd2-xCexTi2O7 ceramics. Advances in Applied Ceramics  vol. 114, (4) 191-197. 10.1179/1743676114Y.0000000221

Zhang H, Huang Y, Ning H, Williams CA, London AJ, Dawson K, Hong Z, Gorley MJ, Grovenor CRM, Tatlock GJ, Roberts SG, Reece MJ, Yan H and Grant PS (2015). Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y<inf>2</inf>O<inf>3</inf> ferritic steels fabricated by spark plasma sintering. Journal of Nuclear Materials  vol. 464, 61-68. 10.1016/j.jnucmat.2015.04.029

Yazdani B, Porwal H, Xia Y, Yan H, Reece MJ and Zhu Y (2015). Role of synthesis method on microstructure and mechanical properties of graphene/carbon nanotube toughened Al2O3 nanocomposites. Elsevier Ltd  Ceramics International  10.1016/j.ceramint.2015.04.054

Williams HR, Ambrosi RM, Chen K, Friedman U, Ning H, Reece MJ, Robbins MC, Simpson K and Stephenson K (2015). Spark plasma sintered bismuth telluride-based thermoelectric materials incorporating dispersed boron carbide. Journal of Alloys and Compounds  vol. 626, 368-374. 10.1016/j.jallcom.2014.12.010

Li C, Khaliq J, Ning H, Wei X, Yan H and Reece MJ (2015). Study on properties of tantalum-doped La2Ti2O7 ferroelectric ceramics. Journal of Advanced Dielectrics  vol. 5, (1) 10.1142/S2010135X15500058

Du B, Chen K, Yan H and Reece MJ (2015). Efficacy of lone-pair electrons to engender ultralow thermal conductivity. Scripta Materialia  10.1016/j.scriptamat.2015.05.031

Ashby SP, Bian T, Ning H, Reece MJ and Chao Y (2015). Thermal Diffusivity of SPS Pressed Silicon Powders and the Potential for Using Bottom?Up Silicon Quantum Dots as a Starting Material. Journal of Electronic Materials  10.1007/s11664-014-3599-y

Chen C, Ning H, Lepadatu S, Cain M, Yan H and Reece MJ (2015). Ferroelectricity in Dion-Jacobson ABiNb2O7 (A = Rb, Cs) compounds. Journal of Materials Chemistry C  vol. 3, (1) 19-22. 10.1039/c4tc02136c

Huang JB, Yang B, Yu CY, Zhang GF, Xue H, Xiong ZX, Viola G, Donnan R, Yan HX and Reece MJ (2015). Microwave and terahertz dielectric properties of MgTiO3-CaTiO3 ceramics. Materials Letters  vol. 138, 225-227. 10.1016/j.matlet.2014.09.122

Boccaccini AR, Ferraris M, Reece MJ and Salvo M (2015). Guest editorial: GlaCERCo: Glass and ceramic composites for high technology applications - Marie Curie initial training network. Advances in Applied Ceramics  vol. 114, S1-S2. 10.1179/1743675315Z.000000000347

Porwal H, Kasiarova M, Tatarko P, Grasso S, Dusza J and Reece MJ (2015). Scratch behaviour of graphene alumina nanocomposites. Advances in Applied Ceramics  vol. 114, S34-S41. 10.1179/1743676115Y.0000000030

Saggar R, Porwal H, Tatarko P, Dlouhý I and Reece MJ (2015). Boron nitride nanosheets reinforced glass matrix composites. Advances in Applied Ceramics  vol. 114, S26-S33. 10.1179/1743676115Y.0000000056

Cui S, Boussard-Plédel C, Calvez L, Rojas F, Chen K, Ning H, Reece MJ, Guizouarn T and Bureau B (2015). Comprehensive study of tellurium based glass ceramics for thermoelectric application. Advances in Applied Ceramics  vol. 114, S42-S47. 10.1179/1743676115Y.0000000054

Jeong J, Reece MJ and Pyo M (2015). Improved lithium-storage capability and cyclability of tin dioxide confined in highly crosslinked graphene framework. Journal of The Electrochemical Society  vol. 162, (9) A1702-A1707. 10.1149/2.0211509jes

Li C, Wei X, Fang L, Yan H and Reece MJ (2015). Dielectric relaxation and electrical conductivity in Ca<inf>5</inf>Nb<inf>4</inf>TiO<inf>17</inf> ceramics. Ceramics International  vol. 41, (8) 9923-9930. 10.1016/j.ceramint.2015.04.071

Yazdani B, Porwal H, Xia Y, Yan H, Reece MJ and Zhu Y (2015). Role of synthesis method on microstructure and mechanical properties of graphene/carbon nanotube toughened Al<inf>2</inf>O<inf>3</inf> nanocomposites. Ceramics International  vol. 41, (8) 9813-9822. 10.1016/j.ceramint.2015.04.054

Khaliq J, Li C, Chen K, Shi B, Ye H, Grande AM, Yan H and Reece MJ (2015). Reduced thermal conductivity by nanoscale intergrowths in perovskite like layered structure La2Ti2O7. Journal of Applied Physics  vol. 117, (7) 10.1063/1.4908209

Gao Z, Suzuki TS, Grasso S, Sakka Y and Reece MJ (2015). Highly anisotropic single crystal-like La2Ti2O7 ceramic produced by combined magnetic field alignment and templated grain growth. Journal of The European Ceramic Society  vol. 35, (6) 1771-1776. 10.1016/j.jeurceramsoc.2014.12.003

Huang JB, Yang B, Yu CY, Zhang GF, Xue H, Xiong ZX, Viola G, Donnan R, Yan HX and Reece MJ (2015). Microwave and terahertz dielectric properties of MgTiO3-CaTiO3 ceramics. Materials Letters  vol. 138, 225-227. 10.1016/j.matiet.2014.09.122

Melk L, Roa Rovira JJ, García-Marro F, Antti ML, Milsom B, Reece MJ and Anglada M (2015). Nanoindentation and fracture toughness of nanostructured zirconia/multi-walled carbon nanotube composites. Ceramics International  vol. 41, (2) 2453-2461. 10.1016/j.ceramint.2014.10.060

2014

Li C, Wei X, Fang L, Yan H and Reece MJ (2014). Dielectric relaxation and electrical conductivity in Ca5Nb4TiO17 ceramics. Elsevier Ltd  Ceramics International  10.1016/j.ceramint.2015.04.071

Viola G, Tan Y, McKinnon RA, Wei X, Yan H and Reece MJ (2014). Short range polar state transitions and deviation from Rayleigh-type behaviour in Bi0.5Na0.5TiO3-based perovskites. Applied Physics Letters  vol. 105, (10) 10.1063/1.4895559

Grasso S, Saunders T, Porwal H and Reece M (2014). Ultra-high temperature spark plasma sintering of ?-SiC. Elsevier Ltd  Ceramics International  10.1016/j.ceramint.2014.08.062

Mani MK, Viola G, Reece MJ, Hall JP and Evans SL (2014). Fabrication of carbon nanotube reinforced iron based magnetic alloy composites by spark plasma sintering. Journal of Alloys and Compounds  vol. 601, 146-153. 10.1016/j.jallcom.2014.02.169

Lugovy M, Aman A, Chen Y, Orlovskaya N, Kuebler J, Graule T, Reece MJ, Ma D, Stoica AD and An K (2014). In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. II. Elastic properties. Journal of Applied Physics  vol. 116, (1) 10.1063/1.4884336

Aman A, Chen Y, Lugovy M, Orlovskaya N, Reece MJ, Ma D, Stoica AD and An K (2014). In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. I. Crystal structure analysis and texture development. Journal of Applied Physics  vol. 116, (1) 10.1063/1.4884335

Jiang Q, Yan H, Khaliq J, Shen Y, Simpson K and Reece MJ (2014). Enhancement of thermoelectric properties by atomic-scale percolation in digenite CuxS. Journal of Materials Chemistry A  vol. 2, (25) 9486-9489. 10.1039/c4ta01250j

Tatarko P, Grasso S, Chlup Z, Porwal H, Kašiarová M, Dlouhý I and Reece MJ (2014). Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics. Journal of The European Ceramic Society  vol. 34, (7) 1829-1843. 10.1016/j.jeurceramsoc.2013.12.046

Grasso S, Tatarko P, Rizzo S, Porwal H, Hu C, Katoh Y, Salvo M, Reece MJ and Ferraris M (2014). Joining of ?-SiC by spark plasma sintering. Journal of The European Ceramic Society  vol. 34, (7) 1681-1686. 10.1016/j.jeurceramsoc.2013.12.023

Porwal H, Grasso S, Cordero-Arias L, Li C, Boccaccini AR and Reece MJ (2014). Processing and bioactivity of 45S5 Bioglass(?)-graphene nanoplatelets composites. J Mater Sci Mater Med  vol. 25, (6) 1403-1413. 10.1007/s10856-014-5172-x

Saunders T, Grasso S and Reece MJ (2014). Plasma formation during electric discharge (50V) through conductive powder compacts. Journal of The European Ceramic Society  vol. 35, (3) 10.1016/j.jeurceramsoc.2014.09.022

Jiang Q, Yan H, Khaliq J, Ning H, Grasso S, Simpson K and Reece MJ (2014). Large ZT enhancement in hot forged nanostructured p-type Bi 0.5Sb1.5Te3 bulk alloys. Journal of Materials Chemistry A  vol. 2, (16) 5785-5790. 10.1039/c3ta13952b

Badica P, Grasso S, Borodianska H, Xie SS, Li P, Tatarko P, Reece MJ, Sakka Y and Vasylkiv O (2014). Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600?C) spark plasma sintering. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan  vol. 122, (1424) 271-275. 10.2109/jcersj2.122.271

Rizzo S, Grasso S, Salvo M, Casalegno V, Reece MJ and Ferraris M (2014). Joining of C/SiC composites by spark plasma sintering technique. Journal of The European Ceramic Society  vol. 34, (4) 903-913. 10.1016/j.jeurceramsoc.2013.10.028

Mani MK, Viola G, Reece MJ, Hall JP and Evans SL (2014). Influence of coated SiC particulates on the mechanical and magnetic behaviour of Fe-Co alloy composites. Journal of Materials Science  vol. 49, (6) 2578-2587. 10.1007/s10853-013-7954-9

Koval V, Skorvanek I, Reece M, Mitoseriu L and Yan H (2014). Effect of dysprosium substitution on crystal structure and physical properties of multiferroic BiFeO3 ceramics. Journal of The European Ceramic Society  vol. 34, (3) 641-651. 10.1016/j.jeurceramsoc.2013.10.002

Viola G, Boon Chong K, Guiu F and John Reece M (2014). Role of internal field and exhaustion in ferroelectric switching. Journal of Applied Physics  vol. 115, (3) 10.1063/1.4856235

Charles S, Evans J, Reece MJ and Yan HX (2014). High field ZnO varistors prepared by spark plasma sintering. Advances in Applied Ceramics  vol. 113, (2) 94-97. 10.1179/1743676113Y.0000000087

Gao Z, Shi B, Ye H, Yan H and Reece MJ (2014). Reply to the Comment on The Effect of Barium Substitution on the Ferroelectric Properties of Sr2Nb2O7 Ceramics [J. Am. Ceram. Soc., 96 [4] 1163-1170 (2013)]. Journal of The American Ceramic Society  vol. 97, (2) 662-663. 10.1111/jace.12730

Khaliq J, Jiang Q, Yang J, Simpson K, Yan H and Reece MJ (2014). Utilizing the phonon glass electron crystal concept to improve the thermoelectric properties of combined Yb-stuffed and Te-substituted CoSb 3. Scripta Materialia  vol. 72-73, 63-66. 10.1016/j.scriptamat.2013.10.021

Mani MK, Viola G, Reece MJ, Hall JP and Evans SL (2014). Mechanical and magnetic characterisation of SiC whisker reinforced Fe-Co alloy composites. Materials Science and Engineering A  vol. 592, 19-27. 10.1016/j.msea.2013.10.099

Inam F, Heaton A, Brown P, Peijs T and Reece MJ (2014). Effects of dispersion surfactants on the properties of ceramic-carbon nanotube (CNT) nanocomposites. Ceramics International  vol. 40, (1 PART A) 511-516. 10.1016/j.ceramint.2013.06.031

Grasso S, Saunders T, Porwal H, Cedillos-Barraza O, Jayaseelan DD, Lee WE and Reece MJ (2014). Flash spark plasma sintering (FSPS) of pure ZrB2. Journal of The American Ceramic Society  vol. 97, (8) 2405-2408. 10.1111/jace.13109

Tatarko P, Grasso S, Porwal H, Chlup Z, Saggar R, Dlouhý I and Reece MJ (2014). Boron nitride nanotubes as a reinforcement for brittle matrices. Journal of The European Ceramic Society  vol. 34, (14) 3339-3349. 10.1016/j.jeurceramsoc.2014.03.028

Porwal H, Tatarko P, Saggar R, Grasso S, Kumar Mani M, Dlouhý I, Dusza J and Reece MJ (2014). Tribological properties of silica-graphene nano-platelet composites. Ceramics International  vol. 40, (8 PART A) 12067-12074. 10.1016/j.ceramint.2014.04.046

Mani MK, Viola G, Reece MJ, Hall JP and Evans SL (2014). Improvement of interfacial bonding in carbon nanotube reinforced Fe-50Co composites by Ni-P coating: Effect on magnetic and mechanical properties. Materials Science and Engineering B: Solid-State Materials For Advanced Technology  vol. 188, 94-101. 10.1016/j.mseb.2014.06.009

Grasso S, Saunders T, Porwal H, Cedillos-Barraza O, Jayaseelan DD, Lee WE and Reece MJ (2014). Flash Spark Plasma Sintering (FSPS) of Pure ZrB2. Journal of The American Ceramic Society  10.1111/jace.13109

Bernardo E, Ponsot I, Colombo P, Grasso S, Porwal H and Reece MJ (2014). Polymer-derived SiC ceramics from polycarbosilane/boron mixtures densified by SPS. Ceramics International  10.1016/j.ceramint.2014.07.008

Porwal H, Grasso S, Cordero-Arias L, Li C, Boccaccini AR and Reece MJ (2014). Processing and bioactivity of 45S5 Bioglass?-graphene nanoplatelets composites. Journal of Materials Science: Materials in Medicine  vol. 25, (6) 1403-1413. 10.1007/s10856-014-5172-x

Gelbstein Y, Tunbridge J, Dixon R, Reece MJ, Ning H, Gilchrist R, Summers R, Agote I, Lagos MA, Simpson K, Rouaud C, Feulner P, Rivera S, Torrecillas R, Husband M, Crossley J and Robinson I (2014). Physical, mechanical, and structural properties of highly efficient nanostructured n-and p-silicides for practical thermoelectric applications. Journal of Electronic Materials  vol. 43, (6) 1703-1711. 10.1007/s11664-013-2848-9

Porwal H, Grasso S, Mani MK and Reece MJ (2014). In situ reduction of graphene oxide nanoplatelet during spark plasma sintering of a silica matrix composite. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2014.04.031

Wooldridge J, Stewart M, Vecchini C, Cain MG, Gutmann M and Reece M (2014). Temperature and frequency dependence of electric field-induced phase transitions in PMN-0.32PT. Journal of The American Ceramic Society  10.1111/jace.12904

Weintraub L, Davidow J, Tunbridge J, Dixon R, Reece MJ, Ning H, Agote I and Gelbstein Y (2014). Investigation of the Microstructural and Thermoelectric Properties of the (GeTe)(0.95)(Bi2Te3)(0.05) Composition for Thermoelectric Power Generation Applications. Journal of Nanomaterials  10.1155/2014/284634

Grasso S, Saunders T, Porwal H and Reece M (2014). Ultra-high temperature spark plasma sintering of ?-SiC. Ceramics International  vol. 41, (1) 225-230. 10.1016/j.ceramint.2014.08.062

Tatarko P, Grasso S, Chlup Z, Porwal H, Kašiarová M, Dlouhý I and Reece MJ (2014). Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2013.12.046

Grasso S, Tatarko P, Rizzo S, Porwal H, Hu C, Katoh Y, Salvo M, Reece MJ and Ferraris M (2014). Joining of ?-SiC by spark plasma sintering. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2013.12.023

Downie RA, Popuri SR, Ning H, Reece MJ and Bos JWG (2014). Effect of spark plasma sintering on the structure and properties of Ti1-xZrxNiSn half-Heusler alloys. Materials  vol. 7, (10) 7093-7104. 10.3390/ma7107093

Chen C, Jiang Q, Wei X, Abrahams I, Yan H, Yan H, Reece MJ and Reece MJ (2014). Three layer perovskite-like structured Pr3Ti2TaO11 ferroelectrics with super-high curie point. Journal of The American Ceramic Society  vol. 97, (11) 3624-3630. 10.1111/jace.13189

2013

Porwal H, Tatarko P, Grasso S, Khaliq J, Dlouhý I and Reece MJ (2013). Graphene reinforced alumina nano-composites. Carbon  vol. 64, 359-369. 10.1016/j.carbon.2013.07.086

Porwal H, Grasso S and Reece MJ (2013). Review of graphene-ceramic matrix composites. Advances in Applied Ceramics  vol. 112, (8) 443-454. 10.1179/174367613X13764308970581

Viola G, Boon Chong K, Eriksson M, Shen Z, Zeng J, Yin Q, Kan Y, Wang P, Ning H, Zhang H, Fitzpatrick ME, Reece MJ and Yan H (2013). Effect of grain size on domain structures, dielectric and thermal depoling of Nd-substituted bismuth titanate ceramics. Applied Physics Letters  vol. 103, (18) 10.1063/1.4827537

Porwal H, Tatarko P, Grasso S, Hu C, Boccaccini AR, Dlouhý I and Reece MJ (2013). Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets. Science and Technology of Advanced Materials  vol. 14, (5) 10.1088/1468-6996/14/5/055007

Mani MK, Viola G, Reece MJ, Hall JP and Evans SL (2013). Structural and magnetic characterization of spark plasma sintered Fe-50Co alloys. Materials Research Society Symposium Proceedings  vol. 1516, 201-207. 10.1557/opl.2012.1669

Ning H, Yan H, Gao Z, Wei X and Reece MJ (2013). Effect of donor dopants cerium and tungsten on the dielectric and electrical properties of high Curie point ferroelectric strontium niobate. Ceramics International  vol. 39, (7) 7669-7675. 10.1016/j.ceramint.2013.03.019

Ambrosi RM, Williams HR, Samara-Ratna P, Jorden A, Slade R, Bannister NP, Sykes J, Deacon T, Stephenson K, Simpson K, Reece M, Ning H, Stuttard M, Rice T, Tinsley T, Sarsfield M, Jaegle M, Koenig J, Edgington A and Lerman H (2013). Development and testing of an americium-241 radioisotope thermoelectric generator. Nuclear and Emerging Technologies For Space, Nets 2013  450-454.

Viola G, Ning H, Wei X, Deluca M, Adomkevicius A, Khaliq J, John Reece M and Yan H (2013). Dielectric relaxation, lattice dynamics and polarization mechanisms in Bi0.5Na0.5TiO3-based lead-free ceramics. Journal of Applied Physics  vol. 114, (1) 10.1063/1.4812383

Puchy V, Hvizdos P, Dusza J, Kovac F, Inam F and Reece MJ (2013). Wear resistance of Al2O3-CNT ceramic nanocomposites at room and high temperatures. Ceramics International  vol. 39, (5) 5821-5826. 10.1016/j.ceramint.2012.12.100

Li C, Wei X, Yan H, Reece MJ and Ye H (2013). Microwave dielectric properties of CaO-La2O3-Nb 2O5-TiO2 ceramics. Journal of Materials Science: Materials in Electronics  vol. 24, (6) 1947-1954. 10.1007/s10854-012-1039-4

Grasso S, Poetschke J, Richter V, Maizza G, Sakka Y and Reece MJ (2013). Low-temperature spark plasma sintering of pure nano WC powder. Journal of The American Ceramic Society  vol. 96, (6) 1702-1705. 10.1111/jace.12365

Gao ZP, Yan HX, Ning HP, Wilson R, Wei XY, Shi B, Ye H and Reece MJ (2013). Piezoelectric and dielectric properties of Ce substituted La2Ti2O7 ceramics. Journal of The European Ceramic Society  vol. 33, (5) 1001-1008. 10.1016/j.jeurceramsoc.2012.11.015

Gao Z, Ning H, Chen C, Wilson R, Shi B, Ye H, Yan H and Reece MJ (2013). The effect of barium substitution on the ferroelectric properties of Sr2 Nb2 O7 Ceramics. Journal of The American Ceramic Society  vol. 96, (4) 1163-1170. 10.1111/jace.12121

Grasso S, Yoshida H, Porwal H, Sakka Y and Reece M (2013). Highly transparent ?-alumina obtained by low cost high pressure SPS. Ceramics International  vol. 39, (3) 3243-3248. 10.1016/j.ceramint.2012.10.012

Grasso S, Tsujii N, Jiang Q, Khaliq J, Maruyama S, Miranda M, Simpson K, Mori T and Reece MJ (2013). Ultra low thermal conductivity of disordered layered p-type bismuth telluride. Journal of Materials Chemistry C  vol. 1, (12) 2362-2367. 10.1039/c3tc30152d

Gao ZP, Yan HX, Ning HP and Reece MJ (2013). Ferroelectricity of Pr2Ti2O7 ceramics with super high Curie point. Advances in Applied Ceramics  vol. 112, (2) 69-74. 10.1179/1743676112Y.0000000030

Cui B, Zapata-Solvas E, Reece MJ, Wang CA and Lee WE (2013). Microstructure and high-temperature oxidation behavior of Ti3AlC 2/W composites. Journal of The American Ceramic Society  vol. 96, (2) 584-591. 10.1111/jace.12095

Wei X, Yan H, Wang T, Hu Q, Viola G, Grasso S, Jiang Q, Jin L, Xu Z and Reece MJ (2013). Reverse boundary layer capacitor model in glass/ceramic composites for energy storage applications. Journal of Applied Physics  vol. 113, (2) 10.1063/1.4775493

Grasso S, Chinnam RK, Porwal H, Boccaccini AR and Reece MJ (2013). Low temperature spark plasma sintering of 45S5 Bioglass? Journal of Non-Crystalline Solids  vol. 362, (1) 25-29. 10.1016/j.jnoncrysol.2012.11.009

Williams HR, Ning H, Reece MJ, Ambrosi RM, Bannister NP and Stephenson K (2013). Metal matrix composite fuel for space radioisotope energy sources. Journal of Nuclear Materials  vol. 433, (1-3) 116-123. 10.1016/j.jnucmat.2012.09.030

Gelbstein Y, Tunbridge J, Dixon R, Reece MJ, Ning H, Gilchrist R, Summers R, Agote I, Lagos MA, Simpson K, Rouaud C, Feulner P, Rivera S, Torrecillas R, Husband M, Crossley J and Robinson I (2013). Physical, Mechanical, and Structural Properties of Highly Efficient Nanostructured n- and p-Silicides for Practical Thermoelectric Applications. Journal of Electronic Materials  1-9.

Koval V, Skorvanek I, Reece M, Mitoseriu L and Yan H (2013). Effect of dysprosium substitution on crystal structure and physical properties of multiferroic BiFeO3 ceramics. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2013.10.002

Jiang Q, Ning H, Zhang Q, Cain M, Reece MJ and Yan H (2013). Active ferroelectricity in nanostructured multiferroic BiFeO3 bulk ceramics. Journal of Materials Chemistry C  vol. 1, (36) 5628-5631. 10.1039/c3tc31140f

Porwal H, Tatarko P, Grasso S, Khaliq J, Dlouhý I and Reece MJ (2013). Graphene reinforced alumina nano-composites. Carbon  10.1016/j.carbon.2013.07.086

Inam F, Heaton A, Brown P, Peijs T and Reece MJ (2013). Effects of dispersion surfactants on the properties of ceramic-carbon nanotube (CNT) nanocomposites. Ceramics International  10.1016/j.ceramint.2013.06.031

Grasso S, Poetschke J, Richter V, Maizza G, Sakka Y and Reece MJ (2013). Low-temperature spark plasma sintering of pure nano wc powder. Journal of The American Ceramic Society  10.1111/jace.12365

Ning H, Yan H, Gao Z, Wei X and Reece MJ (2013). Effect of donor dopants cerium and tungsten on the dielectric and electrical properties of high Curie point ferroelectric strontium niobate. Ceramics International  10.1016/j.ceramint.2013.03.019

Puchy V, Hvizdos P, Dusza J, Kovac F, Inam F and Reece MJ (2013). Wear resistance of Al2O3-CNT ceramic nanocomposites at room and high temperatures. Ceramics International  10.1016/j.ceramint.2012.12.100

Khaliq J, Jiang Q, Yang J, Simpson K, Yan H and Reece MJ (2013). Utilizing the phonon glass electron crystal concept to improve the thermoelectric properties of combined Yb-stuffed and Te-substituted CoSb3. Scripta Materialia  10.1016/j.scriptamat.2013.10.021

Rizzo S, Grasso S, Salvo M, Casalegno V, Reece MJ and Ferraris M (2013). Joining of C/SiC composites by spark plasma sintering technique. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2013.10.028

2012

Liu J, Yan H, Reece MJ and Jiang K (2012). Toughening of zirconia/alumina composites by the addition of graphene platelets. Journal of The European Ceramic Society  vol. 32, (16) 4185-4193. 10.1016/j.jeurceramsoc.2012.07.007

Li C, Wei X, Yan H and Reece MJ (2012). Microwave dielectric properties of La 3Ti 2TaO 11 ceramics with perovskite-like layered structure. Journal of The European Ceramic Society  vol. 32, (16) 4015-4020. 10.1016/j.jeurceramsoc.2012.06.002

Milsom B, Viola G, Gao Z, Inam F, Peijs T and Reece MJ (2012). The effect of carbon nanotubes on the sintering behaviour of zirconia. Journal of The European Ceramic Society  vol. 32, (16) 4149-4156. 10.1016/j.jeurceramsoc.2012.07.028

Gao Z, Viola G, Milsom B, Whitaker I, Yan H and Reece MJ (2012). Kinetics of Densification and Grain Growth of Pure Tungsten During Spark Plasma Sintering. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science  vol. 43, (6) 1608-1614. 10.1007/s11663-012-9704-9

Shen Z, Yan H, Grüner D, Belova LM, Sakamoto Y, Hu J, Nan CW, Höche T and Reece MJ (2012). Ferroelectric ceramics with enhanced remnant polarization by ordered coalescence of nano-crystals. Journal of Materials Chemistry  vol. 22, (44) 23547-23552. 10.1039/c2jm32191b

Khanduri H, Chandra Dimri M, Kooskora H, Heinmaa I, Viola G, Ning H, Reece MJ, Krustok J and Stern R (2012). Structural, dielectric, magnetic, and nuclear magnetic resonance studies of multiferroic Y-type hexaferrites. Journal of Applied Physics  vol. 112, (7) 10.1063/1.4754532

Viola G, Ning H, Reece MJ, Wilson R, Correia TM, Weaver P, Cain MG and Yan H (2012). Reversibility in electric field-induced transitions and energy storage properties of bismuth-based perovskite ceramics. Journal of Physics D: Applied Physics  vol. 45, (35) 10.1088/0022-3727/45/35/355302

Chintapalli RK, Marro FG, Milsom B, Reece M and Anglada M (2012). Processing and characterization of high-density zirconia-carbon nanotube composites. Materials Science and Engineering A  vol. 549, 50-59. 10.1016/j.msea.2012.03.115

Chaudhry AA, Yan H, Viola G, Reece MJ, Knowles JC, Gong K, Rehman I and Darr JA (2012). Phase stability and rapid consolidation of hydroxyapatite-zirconia nano-coprecipitates made using continuous hydrothermal flow synthesis. Journal of Biomaterials Applications  vol. 27, (1) 79-90. 10.1177/0885328212444483

Patel B, Favaro G, Inam F, Reece MJ, Angadji A, Bonfield W, Huang J and Edirisinghe M (2012). Cobalt-based orthopaedic alloys: Relationship between forming route, microstructure and tribological performance. Materials Science and Engineering C  vol. 32, (5) 1222-1229. 10.1016/j.msec.2012.03.012

Inam F, Reece MJ and Peijs T (2012). Shortened carbon nanotubes and their influence on the electrical properties of polymer nanocomposites. Journal of Composite Materials  vol. 46, (11) 1313-1322. 10.1177/0021998311418139

Rozana MD, Reece MJ, Latif F, Wahid MH, Avshad AN and Sanp MN (2012). Effect of PTFE and OTS on the ferroelectric properties of PVDF-TRFE thin films. World Applied Sciences Journal  vol. 16, (9) 1196-1202.

Cui B, Sa R, Jayaseelan DD, Inam F, Reece MJ and Lee WE (2012). Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti 2AlN ceramics. Acta Materialia  vol. 60, (3) 1079-1092. 10.1016/j.actamat.2011.11.010

Wojta¿ M and Reece MJ (2012). Dynamics of ferroelectric switching of [H3CNH3] 5[Bi2Br11]. Journal of Applied Physics  vol. 111, (2) 10.1063/1.3677994

Grasso S, Yoshida H, Porwal H, Sakka Y and Reece M (2012). Highly transparent ?-alumina obtained by low cost high pressure SPS. Ceramics International  10.1016/j.ceramint.2012.10.012

Chintapalli RK, Jimenez-Pique E, Marro FG, Yan H, Reece M and Anglada M (2012). Spherical instrumented indentation of porous nanocrystalline zirconia. Journal of The European Ceramic Society  vol. 32, (1) 123-132. 10.1016/j.jeurceramsoc.2011.07.037

Gao Z, Ning H, Chen C, Wilson R, Shi B, Ye H, Yan H and Reece MJ (2012). The Effect of Barium Substitution on the Ferroelectric Properties of Sr2Nb2O7 Ceramics. Journal of The American Ceramic Society  10.1111/jace.12121

Li C, Wei X, Yan H, Reece MJ and Ye H (2012). Microwave dielectric properties of CaO-La2O3-Nb2O5-TiO2 ceramics. Journal of Materials Science: Materials in Electronics  1-8.

Gao ZP, Yan HX, Ning HP, Wilson R, Wei XY, Shi B, Ye H and Reece MJ (2012). Piezoelectric and dielectric properties of Ce substituted La2Ti2O7 ceramics. Journal of The European Ceramic Society  10.1016/j.jeurceramsoc.2012.11.015

Cui B, Zapata-Solvas E, Reece MJ, Wang C-A and Lee WE (2012). Microstructure and High-temperature Oxidation Behavior of Ti 3AlC 2/W Composites. Journal of The American Ceramic Society  10.1111/jace.12095

2011

Inam F, Peijs T and Reece MJ (2011). The production of advanced fine-grained alumina by carbon nanotube addition. Journal of The European Ceramic Society  vol. 31, (15) 2853-2859. 10.1016/j.jeurceramsoc.2011.07.011

Chima-Okereke C, Roberts WL, Bushby AJ and Reece MJ (2011). The elastic properties of ferroelectric thin films measured using nanoindentation. Springer Series in Materials Science  vol. 140, (1) 543-572.

Eriksson M, Yan H, Viola G, Ning H, Gruner D, Nygren M, Reece MJ and Shen Z (2011). Ferroelectric domain structures and electrical properties of fine-grained lead-free sodium potassium niobate ceramics. Journal of The American Ceramic Society  vol. 94, (10) 3391-3396. 10.1111/j.1551-2916.2011.04510.x

Puchý V, Dusza J, Inam F and Reece MJ (2011). Indentation toughness of Al2O3-CNT nanocomposites. Chemicke Listy  vol. 105, (17)

Jiang Q, Liu F, Yan H, Ning H, Libor Z, Zhang Q, Cain M and Reece MJ (2011). Magneto-electric properties of multiferroic Pb(Zr0.52Ti 0.48)O3-NiFe2O4 nanoceramic composites. Journal of The American Ceramic Society  vol. 94, (8) 2311-2314. 10.1111/j.1551-2916.2011.04665.x

Cho J, Inam F, Reece MJ, Chlup Z, Dlouhy I, Shaffer MSP and Boccaccini AR (2011). Carbon nanotubes: Do they toughen brittle matrices? Journal of Materials Science  vol. 46, (14) 4770-4779. 10.1007/s10853-011-5387-x

Puchý V, Dusza J, Hvizdoš P, Inam F and Reece MJ (2011). Mechanical and electrical properties of al2o3-cnt nanocomposites. Chemicke Listy  vol. 105, (16 SPEC. ISSUE)

Patel B, Inam F, Reece MJ, Edirisinghe M, Bonfield W, Huang J and Angadji A (2011). Mechanism of chromium oxide formation in cobalt-chromium-molybdenum (F75) alloys prepared using spark plasma sintering. Advanced Engineering Materials  vol. 13, (5) 411-417. 10.1002/adem.201000367

Chaudhry AA, Yan HX, Gong KN, Inam F, Viola G, Reece MJ, Goodall JBM, Rehman IU, McNeil-Watson FK, Corbett JCW, Knowles JC and Darr JA (2011). High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering. Acta Biomater  vol. 7, (2) 791-799. 10.1016/j.actbio.2010.09.029

2010

Vopson MM, Weaver PM, Cain MG, Reece MJ and Chong KB (2010). Polarization dynamics and non-equilibrium processes in ferroelectric switching. Proceedings of The 2010 Ieee International Symposium On The Applications of Ferroelectrics, Isaf 2010, Co-Located With The 10th  10.1109/ISAF.2010.5712238

Patel B, Inam F, Reece M, Edirisinghe M, Bonfield W, Huang J and Angadji A (2010). A novel route for processing cobalt-chromium-molybdenum orthopaedic alloys. Journal of The Royal Society Interface  vol. 7, (52) 1641-1645. 10.1098/rsif.2010.0036

Zeng T, Yan HX and Reece MJ (2010). Effect of point defects on thermal depoling behavior of bismuth layer-structured ferroelectric ceramics. J Appl Phys  vol. 108, (9) 10.1063/1.3499627

Amelino-Camelia G, Archilli F, Babusci D, Badoni D, Bencivenni G, Bernabeu J, Bertlmann RA, Boito DR, Bini C, Bloise C, Bocci V, Bossi F, Branchini P, Budano A, Bulychjev SA, Campana P, Capon G, Ceradini F, Ciambrone P and Czerwinski E (2010). Physics with the KLOE-2 experiment at the upgraded DA Phi NE. European Physical Journal C  vol. 68, (3-4) 619-681. 10.1140/epjc/s10052-010-1351-1

Zhang HT, Yan HX and Reece MJ (2010). Microstructure and electrical properties of Aurivillius phase (CaBi2Nb2O9)(1-x)(BaBi2Nb2O9)(x) solid solution. J Appl Phys  vol. 108, (1) 10.1063/1.3457229

Weng XL, Brett D, Yufit V, Shearing P, Brandon N, Reece M, Yan HX, Tighe C and Darr JA (2010). Highly conductive low nickel content nano-composite dense cermets from nano-powders made via a continuous hydrothermal synthesis route. Solid State Ionics  vol. 181, (17-18) 827-834. 10.1016/j.ssi.2010.04.014

Inam F, Yan HX, Peijs T and Reece MJ (2010). The sintering and grain growth behaviour of ceramic-carbon nanotube nanocomposites. Compos Sci Technol  vol. 70, (6) 947-952. 10.1016/j.compscitech.2010.02.010

Zhang H, Yan H and Reece MJ (2010). High temperature lead-free relaxor ferroelectric: Intergrowth Aurivillius phase BaBi2Nb2O9-Bi4Ti 3O12 ceramics. Journal of Applied Physics  vol. 107, (10) 10.1063/1.3380847

Inam F, Yan HX, Tu W and Reece M (2010). Sparking advanced ceramics. Mater World  vol. 18, (5) 26-28.

Jackson HF, Jayaseelan DD, Lee WE, Reece MJ, Inam F, Manara D, Casoni CP, De Bruycker F and Boboridis K (2010). Laser melting of spark plasma-sintered zirconium carbide: Thermophysical properties of a generation IV very high-temperature reactor material. International Journal of Applied Ceramic Technology  vol. 7, (3) 316-326. 10.1111/j.1744-7402.2009.02434.x

Ning HP, Yan HX and Reece MJ (2010). Piezoelectric Strontium Niobate and Calcium Niobate Ceramics with Super-High Curie Points. J Am Ceram Soc  vol. 93, (5) 1409-1413. 10.1111/j.1551-2916.2009.03587.x

Inam F, Yan H, Reece MJ and Peijs T (2010). Structural and chemical stability of multiwall carbon nanotubes in sintered ceramic nanocomposite. Adv Appl Ceram  vol. 109, (4) 240-245. 10.1179/174367509X12595778633336

Yan HX, Ning HP, Zhang HT and Reece MJ (2010). Textured high Curie point piezoelectric ceramics prepared by spark plasma sintering. Adv Appl Ceram  vol. 109, (3) 139-142. 10.1179/174367509X12502621261334

Chintapalli R, Mestra A, Marro FG, Yan H, Reece M and Anglada M (2010). Stability of Nanocrystalline Spark Plasma Sintered 3Y-TZP. Materials  vol. 3, (2) 800-814. 10.3390/ma3020800

Eriksson M, Yan HX, Nygren M, Reece MJ and Shen ZJ (2010). Low temperature consolidated lead-free ferroelectric niobate ceramics with improved electrical properties. J Mater Res  vol. 25, (2) 240-247. 10.1557/JMR.2010.0034

Inam F, Yan HX, Jayaseelan DD, Peijs T and Reece MJ (2010). Electrically conductive alumina-carbon nanocomposites prepared by Spark Plasma Sintering. Journal of The European Ceramic Society  vol. 30, (2) 153-157. 10.1016/j.jeurceramsoc.2009.05.045

2009

Dusza J, Blugan G, Morgiel J, Kuebler J, Inam F, Peijs T, Reece MJ and Puchy V (2009). Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. Journal of The European Ceramic Society  vol. 29, (15) 3177-3184. 10.1016/j.jeurceramsoc.2009.05.030

Chintapalli R, Marro FG, Valle JA, Yan H, Reece MJ and Anglada M (2009). Degradation resistance of 3Y-TZP ceramics sintered using spark plasma sintering. Iop Conference Series: Materials Science and Engineering  vol. 5, 10.1088/1757-899X/5/1/012014

Zeng T, Yan HX, Ning HP, Zeng JT and Reece MJ (2009). Piezoelectric and Ferroelectric Properties of Bismuth Tungstate Ceramics Fabricated by Spark Plasma Sintering. J Am Ceram Soc  vol. 92, (12) 3108-3110. 10.1111/j.1551-2916.2009.03344.x

Viola G, Verbylo D, Orlovskaya N and Reece MJ (2009). Effect of composition on rate dependence of ferroelastic/ferroelectric switching in perovskite ceramics. Materials Science and Technology  vol. 25, (11) 1312-1315. 10.1179/026708309X12474766656218

Yan HX, Ning HP, Kan YM, Wang PL and Reece MJ (2009). Piezoelectric Ceramics with Super-High Curie Points. J Am Ceram Soc  vol. 92, (10) 2270-2275. 10.1111/j.1551-2916.2009.03209.x

Zhang H, Yan H, Ning H, Reece MJ, Eriksson M, Shen Z, Kan Y and Wang P (2009). The grain size effect on the properties of Aurivillius phase Bi 3.15Nd0.85Ti3O12 ferroelectric ceramics. Nanotechnology  vol. 20, (38) 10.1088/0957-4484/20/38/385708

Dancer CEJ, Prabhakaran D, Basoglu M, Yanmaz E, Yan H, Reece M, Todd RI and Grovenor CRM (2009). Fabrication and properties of dense ex situ magnesium diboride bulk material synthesized using spark plasma sintering. Supercond Sci Tech  vol. 22, (9) 10.1088/0953-2048/22/9/095003

Zhang HT, Yan HX and Reece MJ (2009). The effect of Nd substitution on the electrical properties of Bi3NbTiO9 Aurivillius phase ceramics. J Appl Phys  vol. 106, (4) 10.1063/1.3205006

Jiang QH, Liu FT, Nan CW, Lin YH, Reece MJ, Yan HX, Ning HP and Shen ZJ (2009). High-temperature ferroelectric phase transition observed in multiferroic Bi0.91La0.05Tb0.04FeO3. Applied Physics Letters  vol. 95, (1) 10.1063/1.3158952

Orlovskaya N, Lugovy M, Verbylo D and Reece MJ (2009). Dual ferroelasticity of lanthanum chromium-based multicomponent solid solution perovskite. Scripta Materialia  vol. 60, (9) 783-786. 10.1016/j.scriptamat.2009.01.019

2008

Zhang X, Yan H and Reece MJ (2008). Effect of a site substitution on the properties of CaBi2Nb 2O9 ferroelectric ceramics. Journal of The American Ceramic Society  vol. 91, (9) 2928-2932. 10.1111/j.1551-2916.2008.02564.x

Lugovy M, Slyunyayev V, Orlovskaya N, Verbylo D and Reece MJ (2008). Room-temperature creep of LaCoO3 -based perovskites: Equilibrium strain under compression. Physical Review B - Condensed Matter and Materials Physics  vol. 78, (2) 10.1103/PhysRevB.78.024107

Inam F, Yan H, Reece MJ and Peijs T (2008). Dimethylformamide: an effective dispersant for making ceramic-carbon nanotube composites. Nanotechnology  vol. 19, (19) 10.1088/0957-4484/19/19/195710

Chong KB, Guiu F and Reece MJ (2008). Thermal activation of ferroelectric switching. Journal of Applied Physics  vol. 103, (1) 10.1063/1.2822179

Sohn KS, Kwak JH, Jung YS, Yan HX and Reece MJ (2008). Luminescence of Sr2SiO4-xN2x/3 : Eu2+ phosphors prepared by spark plasma sintering. J Electrochem Soc  vol. 155, (2) J58-J61. 10.1149/1.2817892

2007

Liu J, Shen Z, Yan H, Reece MJ, Kan Y and Wang P (2007). Dielectric, piezoelectric, and ferroelectric properties of grain-orientated Bi3.25La0.75Ti3O12 ceramics. J Appl Phys  vol. 102, (10) 10.1063/1.2812697

Inam F, Yan H, Zhang R, Peijs T and Reece M (2007). Firing on all cylinders. Materials World  vol. 15, (10) 24-25.

Guo Z, Blugan G, Kirchner R, Reece M, Graule T and Kuebler J (2007). Microstructure and electrical properties of Si3N4-TiN composites sintered by hot pressing and spark plasma sintering. Ceramics International  vol. 33, (7) 1223-1229. 10.1016/j.ceramint.2006.03.029

Guo Z, Parlinska-Wojtan M, Blugan G, Graule T, Reece MJ and Kuebler J (2007). The influence of the grain boundary phase on the mechanical properties of Si3N4-MoSi2 composites. Acta Materialia  vol. 55, (8) 2875-2884. 10.1016/j.actamat.2006.12.026

Koval V, Reece MJ and Bushby AJ (2007). Enhanced ferroelectric loop asymmetry of lead zirconate titanate thin films under nanoindentation. Journal of Applied Physics  vol. 101, (2) 10.1063/1.2430699

Guo Z, Blugan G, Graule T, Reece M and Kuebler J (2007). The effect of different sintering additives on the electrical and oxidation properties of Si3N4-MoSi2 composites. Journal of The European Ceramic Society  vol. 27, (5) 2153-2161. 10.1016/j.jeurceramsoc.2006.07.009

2006

Samarasinghe SR, Pastoriza-Santos I, Edirisinghe MJ, Reece MJ and Liz-Marzán LM (2006). Printing gold nanoparticles with an electrohydrodynamic direct-write device. Gold Bulletin  vol. 39, (2) 48-53. 10.1007/BF03215276

Yan HX, Reece MJ, Liu J, Shen ZJ, Kan YM and Wang PL (2006). Effect of texture on dielectric properties and thermal depoling of Bi4Ti3O12 ferroelectric ceramics. J Appl Phys  vol. 100, (7) 10.1063/1.2356092

Yan HX, Zhang HT, Zhang Z, Ubic R and Reece MJ (2006). B-site donor and acceptor doped Aurivillius phase Bi3NbTiO9 ceramics. J Eur Ceram Soc  vol. 26, (13) 2785-2792. 10.1016/j.jeurceramsoc.2005.07.056

Yan HX, Zhang HT, Ubic R, Reece M, Liu J and Shen ZJ (2006). Orientation dependence of dielectric and relaxor behaviour in Aurivillius phase BaBi2Nb2O9 ceramics prepared by spark plasma sintering. J Mater Sci-Mater El  vol. 17, (9) 657-661. 10.1007/s10854-006-0017-0

Orlovskaya N, Anderson H, Brodnikovskyy M, Lugovy M and Reece MJ (2006). Inelastic deformation behavior of la 0.6Sr 0.4FeO 3 perovskite. Journal of Applied Physics  vol. 100, (2) 10.1063/1.2218026

Kašiarová M, Dusza J, Hnatko M, Šajgalík P and Reece MJ (2006). Fractographic montage for a Si3N4-SiC nanocomposite. Journal of The American Ceramic Society  vol. 89, (5) 1752-1755. 10.1111/j.1551-2916.2006.00956.x

Chima-Okereke C, Bushby AJ, Reece MJ, Whatmore RW and Zhang Q (2006). Experimental, analytical, and finite element analyses of nanoindentation of multilayer PZT/Pt/SiO2 thin film systems on silicon wafers. Journal of Materials Research  vol. 21, (2) 409-419. 10.1557/jmr.2006.0047

2005

Yan HX, Zhang HT, Reece MJ and Dong XL (2005). Thermal depoling of high Curie point Aurivillius phase ferroelectric ceramics. Appl Phys Lett  vol. 87, (8) 10.1063/1.2034121

Dusza J, Koval¿ík J, Hvizdoš P, Šajgalik P, Hnatko M and Reece MJ (2005). Enhanced creep resistant silicon-nitride-based nanocomposite. Journal of The American Ceramic Society  vol. 88, (6) 1500-1503. 10.1111/j.1551-2916.2005.00289.x

Yan HX, Zhang HT, Ubic R, Reece MJ, Liu J, Shen ZJ and Zhang Z (2005). A lead-free high-Curie-point ferroelectric ceramic, CaBi2Nb2O9. Adv Mater  vol. 17, (10) 1261-+. 10.1002/adma.200401860

Koval V, Reece MJ and Bushby AJ (2005). Ferroelectric/ferroelastic behavior and piezoelectric response of lead zirconate titanate thin films under nanoindentation. Journal of Applied Physics  vol. 97, (7) 10.1063/1.1870092

2004

Algueró M, Calzada ML, Bushby AJ and Reece MJ (2004). Ferroelectric hysteresis loops of (Pb, Ca)TiO3 thin films under spherical indentation. Applied Physics Letters  vol. 85, (11) 2023-2025. 10.1063/1.1787594

Dusza J, Kovalik J, Hvizdos P, Sajgalik P, Hnatko M and Reece M (2004). Creep behavior of a carbon-derived Si3N4/SiC nanocomposite. Journal of The European Ceramic Society  vol. 24, (12) 3307-3315. 10.1016/j.jeuroceramsoc.2003.10.046

2003

Koval¿ík J, Hvizdoš P, Dusza J, Šajgalík P, Hnatko M and Reece M (2003). Short-term high temperature deformation and recovery in Si 3N4 based materials. Kovove Materialy  vol. 41, (6) 377-388.

Guiu F, Algueró M and Reece MJ (2003). Crack extension force and rate of mechanical work of fracture in linear dielectrics and piezoelectrics. Philosophical Magazine  vol. 83, (7) 873-888. 10.1080/0141861021000054610

2002

Algueró M, Bushby AJ, Reece MJ and Seifert A (2002). Anelastic deformation of Pb(Zr,Ti)O3 thin films by non-180? ferroelectric domain wall movements during nanoindentation. Applied Physics Letters  vol. 81, (3) 421-423. 10.1063/1.1491291

Orlovskaya N, Gogotsi Y, Reece M, Cheng B and Ion G (2002). Ferroelasticity and hysteresis in LaCoO3 based perovskites. Acta Materialia  vol. 50, (4) 715-723. 10.1016/S1359-6454(01)00382-2

Reece MJ and Guiu F (2002). Toughening produced by crack-tip-stress-induced domain reorientation in ferroelectric and/or ferroelastic materials. Philosophical Magazine a: Physics of Condensed Matter, Structure, Defects and Mechanical Properties  vol. 82, (1) 29-38. 10.1080/01418610110058301

2001

Alguero M, Bushby AJ, Reece MJ, Poyato R, Ricote J, Calzada ML and Pardo L (2001). Stress-induced depolarization of (Pb, La)TiO3 ferroelectric thin films by nanoindentation. Appl Phys Lett  vol. 79, (23) 3830-3832. 10.1063/1.1418258

Algueró M, Bushby AJ, Hvizdos P, Reece MJ, Whatmore RW and Zhang Q (2001). Mechanical and electromechanical properties of PZT sol-gel thin films measured by nanoindentation. Integrated Ferroelectrics  vol. 41, (1-4) 53-62. 10.1080/10584580108012807

Algueró M, Bushby AJ and Reece MJ (2001). Measurement of electrical charge during nanoindentation of ferroelectric thin films. Materials Research Society Symposium - Proceedings  vol. 657,

Davies CKL, Oddy D, Reece MJ, Stevens RN, Williams K, Fantozzi G, Olagnon C and Torrecillas R (2001). High temperature creep/fatigue of single or multiphase ceramics with an additional glass/liquid phase. International Journal of Materials and Product Technology  (SPEC ISS. VOL.2) 530-537.

Algueró M, Bushby AJ and Reece MJ (2001). Direct measurement of mechanical properties of (Pb,La)TiO3 ferroelectric thin films using nanoindentation techniques. Journal of Materials Research  vol. 16, (4) 993-1002. 10.1557/JMR.2001.0140

Hvizdoš P, Reece MJ and Torrecillas R (2001). Fatigue behaviour of mullite studied by the indentation flexure method. Journal of The European Ceramic Society  vol. 21, (1) 53-61. 10.1016/S0955-2219(00)00172-2

2000

Cheng BL, Reece MJ, Guiu F and Alguero M (2000). Fracture of PZT piezoelectric ceramics under compression-compression loading. Scripta Mater  vol. 42, (4) 353-357. 10.1016/S1359-6462(99)00365-6

Li M and Reece MJ (2000). Influence of grain size on the indentation-fatigue behavior of alumina. Journal of The American Ceramic Society  vol. 83, (4) 967-970. 10.1111/j.1151-2916.2000.tb01307.x

1999

Calderon-Moreno JM, Guiu F, Meredith M, Reece MJ and Sohn KS (1999). Indentation damage zone in calcium and lead titanate ceramics. British Ceramic Transactions  vol. 98, (6) 296-298. 10.1179/096797899680624

Alguero M, Cheng BL, Gibson IR, Guiu F and Reece MJ (1999). Crack growth during poling and polarisation reversal in commercial piezoceramics. Bol Soc Esp Ceram V  vol. 38, (6) 593-597.

Alguero M, Bushby AJ, Cheng BL, Guiu F, Reece MJ, Calzada ML and Pardo L (1999). The characterisation of ferroelectric thin films using nanoindentation. Bol Soc Esp Ceram V  vol. 38, (5) 446-450.

1998

Davies CKL, Guiu F, Li M, Reece MJ and Torrecillas R (1998). Subcritical crack propagation under cyclic and static loading in mullite and mullite-zirconia. Journal of The European Ceramic Society  vol. 18, (3) 221-227. 10.1016/S0955-2219(97)00118-0

Zhan GD, Reece MJ, Ming LI and Calderon-Moreno JM (1998). Cyclic fatigue crack growth behaviour in ?-(Si-AI-O-N) at ambient and elevated temperatures. Journal of Materials Science  vol. 33, (15) 3867-3874. 10.1023/A:1004620023312

Tartaj P, Reece M and Moya JS (1998). Electrokinetic behavior and stability of silicon carbide nanoparticulate dispersions. Journal of The American Ceramic Society  vol. 81, (2) 389-394. 10.1111/j.1151-2916.1998.tb02345.x

1997

Calderon-Moreno JM, Guiu F, Reece MJ and Sohn KS (1997). Anisotropic deformation and fracture of indented PZT. Key Engineering Materials  vol. 132-136, 551-554.

Penn SJ, Alford NM, Templeton A, Wang X, Xu M, Reece M and Schrapel K (1997). Effect of porosity and grain size on the microwave dielectric properties of sintered alumina. Journal of The American Ceramic Society  vol. 80, (7) 1885-1888. 10.1111/j.1151-2916.1997.tb03066.x

Guiu F, Hahn BS, Lee HL and Reece MJ (1997). Growth of indentation cracks in poled and unpoled PZT. Journal of The European Ceramic Society  vol. 17, (4) 505-512. 10.1016/S0955-2219(96)00089-1

1996

Bollet F, Galiotis C and Reece MJ (1996). Measurement of strain distribution in fibre reinforced ceramic matrix composites. Composites Part a: Applied Science and Manufacturing  vol. 27, (9 PART A) 729-735. 10.1016/1359-835X(96)00052-8

Wang M, Li M, Bushby AJ, Guiu F, Reece MJ and Sammur MFR (1996). High-temperature Fatigue of a Gas-Pressure-Sintered Silicon Nitride. Journal of The European Ceramic Society  vol. 16, (9) 1009-1020. 10.1016/0955-2219(96)00020-9

Castanho SM, Moya JS, Blugan GS and Reece MJ (1996). Si3N4-Al2O3/Si3N4-Y2O3 couple diffusion system. Acta Mater  vol. 44, (3) 1001-1010. 10.1016/1359-6454(95)00247-2

Reece MJ, Worrell CA, Hill GJ and Morrell R (1996). Microstructures and dielectric properties of ferroelectric glass-ceramics. Journal of The American Ceramic Society  vol. 79, (1) 17-26. 10.1111/j.1151-2916.1996.tb07875.x

1994

Bushby A, Guiu F, Knowles J and Reece MJ (1994). Cycle fatigue of silicon nitride at 1000 ?C. Key Engineering Materials  vol. 89-91, 673-677.

1992

GUIU F, LI M and REECE MJ (1992). ROLE OF CRACK-BRIDGING LIGAMENTS IN THE CYCLIC FATIGUE BEHAVIOR OF ALUMINA. J Am Ceram Soc  vol. 75, (11) 2976-2984. 10.1111/j.1151-2916.1992.tb04374.x

Reece MJ, Tetlow PL and Galiotis C (1992). Phase transformation around indentations in zirconia. Journal of Materials Science Letters  vol. 11, (9) 575-577. 10.1007/BF00728613

1991

Guiu F, Reece MJ and Vaughan DAJ (1991). Cyclic fatigue of ceramics. Journal of Materials Science  vol. 26, (12) 3275-3286. 10.1007/BF01124674

REECE M and GUIU F (1991). INDENTATION FATIGUE OF HIGH-PURITY ALUMINA IN FLUID ENVIRONMENTS. J Am Ceram Soc  vol. 74, (1) 148-154. 10.1111/j.1151-2916.1991.tb07310.x

1990

Guiu F, Reece MJ and Vaughan DAJ (1990). Static and cyclic fatigue in some structural ceramics. Proceedings of The Riso International Symposium On Metallurgy and Materials Science  313-318.

REECE M and GUIU F (1990). REPEATED INDENTATION METHOD FOR STUDYING CYCLIC FATIGUE IN CERAMICS. J Am Ceram Soc  vol. 73, (4) 1004-1013. 10.1111/j.1151-2916.1990.tb05149.x

1989

Reece MJ, Guiu F and Sammur MFR (1989). Cyclic Fatigue Crack Propagation in Alumina under Direct Tension?Compression Loading. Journal of The American Ceramic Society  vol. 72, (2) 348-352. 10.1111/j.1151-2916.1989.tb06133.x

1988

Reece MJ and Barber DJ (1988). Observations of the influence of ion-bombardment on the microstructure of synthetic and natural ferrite crystals. Journal of Materials Science Letters  vol. 7, (6) 649-653. 10.1007/BF01730324

1987

Reece MJ and Barber DJ (1987). Electron microscopy of second phases in manganese-zinc ferrite crystals. Journal of Materials Science  vol. 22, (7) 2447-2456. 10.1007/BF01082129

TBC

TBC

^ Back to Top